VANCO WM1024 - Manual (Page 3)

-6- -3-
Part 3 Attaching Adapter Plate to Wall Plate
Attach adapter plate to wall plate by sliding flanges of adapter plate into
flanges of wall plate. Secure with
. Hexagon screw and Plastic latch
Part 3 Attaching Adapter Plate to Wall Plate
Part 1a-Wood Stud Mounting
.
Use wall plate as a template, make sure it is level, and mark mounting holes
along the center line of the wood stud. Drill two 4.
) )
. .
two
3/16 ( 5mm) dia holes 2 (50mm)
deep. Level wall plate and attach to wall with two long bolts(H and two washers(F .
Tighten screws firmly Do not overtighten
” ”
Part 1a-Wood Stud Mounting
2 50mm) ” (
Wood stud
3/16 (4.5mm) ”
Bubble level
H
F
the plastic latch
Wrench (I)2x2
Hexagon screw
Stud finder