Rough Country 291.20 - Manual (Page 6)

10. Remove the upper ball joint using a 18mm socket and separate using a hammer and striking the knuckle on the side as
shown in
Photo 6.
11. Remove the lower ball joint using a 24mm socket and separate with a hammer as shown in
Photo 7. Next remove the
knuckle from the truck.
12. Using a 15mm wrench and socket remove the sway bar links from the truck.
See Photo 8.
13. Remove the lower strut bolts using a 15mm socket as shown in
Photo 9 and remove the upper strut nuts using a 18mm
wrench. Remove the strut from the truck.
14. Remove CV axle bolts using a 15mm socket.
See Photo 10.
15. Using a 10mm socket remove the sway bar from the bottom of the frame.
See Photo 11.
Photo 6 Photo 7
Photo 8 Photo 9
Photo 10 Photo 11