Rough Country 1064 - Manual (Page 2)

INSTALLATION INSTRUCTIONS
1. Remove the ( 7) screws on the top and center of the grill See Photo 1 & 2. Retain the hardware for reuse.
2. Remove the plastic pop rivets from the end of the bumper using side cutters. See Photo 3.
3. Remove the 2 fender bolts using a 3/8” socket. See Photo 4. Retain the hardware for reuse.
4. Remove the 3 push pins from the lower bumper cover. See Photo 5.
5. Remove the harness from the fog lights if so equipped. See Photo 6.
Photo 1 Photo 2
Photo 3 Photo 4
Photo 5 Photo 6
REMOVE SCREWS IN TOP OF GRILL REMOVE SCREWS IN FRONT OF THEGRILL
REMOVE INNER FENDER RETAINERS REMOVE THE FENDER BOLTS
REMOVE THE LOWER RETAINERS REMOVE THE PLUGS FROM FOG LIGHTS