Rough Country 688.20 - Manual (Page 5)

14. Install the track bar in the axle mount location as shown in
PHOTO 12. Install the stock bolt in the upper hole and
tighten. Assemble the front shock absorbers, part # 651896
hydro / 651997 Nitro and install using the factory hardware
on the bottom of the shock. Torque to 20 ft/lbs, Install the
upper stud bushings and tighten the upper mounting point
until bushing swells slightly Repeat for opposite side.
15. Install the tires/wheels and lug nuts, using a 13/16” deep
wheel socket. Lower the vehicle to the ground.
16. Tighten the lower control arms, using a 21mm socket and
21mm /18mm wrench. Torque to 130 ft/lbs.
PHOTO 12
REINSTALL THE TRACK ROD