Rough Country RC701 - Manual (Page 9)

5. Loosen the six bed bolts using 18mm socket but only remove one side at a time. See Photo 6, 7 & 8.
6. With jack stand or hydraulic jack and wood block raise passenger side slowly. See Photo 9. Raise bed up enough
to install body pucks.
7. Install 4 pucks per side and add lock tight on the supplied
12mmx 65mm bolts / washers and install. Torque to 65 ft/
lbs. NOTE:Make sure fuel filler tube is un-obstructed dur-
ing lift of driver side. See Photo 10, 11 & 12.
PHOTO 6 PHOTO 7
PHOTO 8 PHOTO 9
PHOTO 10
REMOVE THE BED HARDWARE REMOVE BED BOLTS
REMOVE BED BOLTS RAISE BED
INSTALL BED PUCKS
PHOTO 11 PHOTO 12
INSTALL BED PUCKS INSTALL BED PUCKS