Rough Country PERF905 User Manual
Page 15
Advertising
2 BOLT TRANSMISSION MOUNT
1. Using a 18 and 19mm wrench remove the bolt holding the transmission mount as shown. See PHOTO 1 & 2. Retain
stock hardware for reuse.
2. Next bolt the supplied transmission mount to the cross-member using the 4 supplied 3/8” x 1 bolts and flange locks.
Tighten with a 9/16” socket and wrench. See PHOTO 3.
3. Install stock hardware using a 18mm and 19mm wrench. See PHOTO 4.
PHOTO 4
PHOTO 3
PHOTO 2
PHOTO 1
Advertising
See also other documents in the category Rough Country For the car:
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)