Rough Country 795 - Manual (Page 3)

10. Remove the 2 rear inside tank bolts using an 18mm.
11. Remove the 2 out side frame gas tank bolts using an 18mm.
12. Install skid plate as shown in Photo 9.
13. Install the out side frame mount bolt as seen in Photo 10
14. Install the inside frame mounts using the stock bolt on the upper part of the mount and the 7/16 bolts in the bottom of the bracket
15. Install the rear outer bracket with the stock bolt and the 7/16 bolts Photo 11 and 12.
16. Check to make sure that all hardware it tightened to the correct torque spec, found on back page.
17. This completes the install. Thanks for buying Rough Country.–
PHOTO 7 PHOTO 8
PHOTO 11
PHOTO 9 PHOTO 10
PHOTO 12