Rough Country RC617 - Manual (Page 10)

03-06 MANUAL SHIFTER INSTALLATION INSTRUCTIONS
1. Remove shifter boot and cup holder from console. See Photo 1 & 2.
2. Using a 10mm socket remove the bolts from console as shown in Photo 3 & 4. One is in cup holder other is under
shifter boot.
3. Remove console. If equipped unplug airbag switch.
4. Using a 45mm torx head socket remove shifter. See Photo 5.
5. Install new shifter extension using stock bolt and supplied 1/4” allen screw. See Photo 6. Tighten using a 45mm torx
bit and a 1/8 allen wrench.
6. Reinstall shifter boot on shifter if removed.
7. Reinstall shifter on new extension with
new 5/16” x1”bolt , using a 1/4” allen head to tighten.
8. Using a 10mm socket reinstall console with stock bolts.
PHOTO 1 PHOTO 2
PHOTO 3 PHOTO 4
REMOVE THE SHIFTET BOOT REMOVE THE CUP HOLDER
REMOVE CONSOLE HARDWARE REMOVE CONSOLE HARDWARE
REMOVE SHIFTER INSTALL SHIFTER EXTENSION