Banks Power Chevy_GMC Trucks: Duramax LB7 (Diesel ’01 - 04 6.6L) Tuner- Banks Bullet Diesel Tuner '01-04 LB7 pickup User Manual
Page 9
Advertising
96578 v.5.0
9
6.
Install the thermocouple insert
into the manifold using anti-seize
compound on the threads. Install the
probe in the thermocouple insert.
7.
Make sure to remove all shavings
from inside the exhaust manifold.
Reinstall the exhaust manifold. Torque
to 28 ft-lb in the sequence shown
Figure 1.
8.
Attach the thermocouple to the
supplied thermocouple lead wire
extension with the supplied nuts and
bolts. Cover this joint with the supplied
heat shrink tubing and heat until the
tubing conforms to the joint. Make
sure the entire joint is insulated.
9.
Refer to Section 2 for instructions
on routing the thermocouple lead wire
to the Banks Bullet tuner.
-END, SECTION 1-
Advertising