Banks Power Chevy_GMC Trucks: Duramax LLY-LBZ (Diesel ’06 - 07 6.6L) Speed Control- SpeedBrake, Advance User Manual '06-08 (PDA) For use with PowerPDA - Manual (Page 6)

6
97233 v.3.0
SPeeD CoNTroL Mode
SPEED cONTROL mode will use various
functions of the SpeedBrake to control
the vehicle to a target speed. When
the SpeedBrake is active and the
vehicle is above the target speed,
braking activity will occur to slow the
vehicle down and then to maintain
the target speed. SpeedBrake activity
will include varying the position of
the turbocharger vanes, selecting
an appropriate transmission gear
and selectively locking the torque
converter clutch. The SpeedBrake will
become inactive once vehicle speed
drops below the target speed.
Use the “UP” portion of the 5-way
navigation button to toggle through
the modes until “SPEED cONTROL”
is displayed. Target speed will be
displayed in the center box on the
System Monitor screen.
Target Speed Selection
There are two methods available for
target speed selection. The target
speed can be increased or decreased
from its current value in increments
of 1 MPH, or the user can select from
three different preset speeds, which
are adjustable.
Press the right side of the 5-way
navigation button to increase the
target speed in 1 MPH increments.
Press the left side of the 5-way
navigation button to decrease speed.
Press the bottom of the 5-way
navigation button to toggle through
the three preset target speeds. See
Figure 1.
Figure 4 Figure 5