Banks Power Chevy_GMC Trucks: Gas ’99 - 14 4.3,4.8,5.3,6.0,6.2,8.1 Exhaust- Monster Exhaust, Single Passenger side exit '07 Chevy Avalanche 5.3L & 6.0L V-8 User Manual
Page 8
8
96540 v.1.0
12.
With the exhaust positioned
properly, begin to evenly tighten the
clamps starting with the ones closest to
the front of the vehicle and working your
way back. Torque the exhaust clamps
evenly to 35 ft-lbs. Torque the 2-bolt
flange, 10mm hardware to 40 ft-lbs.
Make sure that each slip is fully inserted
(+/-1⁄4”).
13.
Remove the protective covering
from the tailpipe tip.
CAutioN: the protective covering
may ignite and burn if not removed
prior to running the engine.
14.
Your system includes two (2) Banks
Power logos designed to complement
the chevy/GMc emblems on the
vehicle’s front doors. See Figure 4 for
recommended logo placement.
15.
Re-connect the negative battery
cable. Start the engine and listen for
exhaust leaks. Tighten the exhaust
clamps as necessary. Whenever
possible, tack weld slip connections
to prevent disengagement is
recommended.
16.
The Banks Monster Exhaust
installation is now complete.
Figure 3