Banks Power Ford Trucks: (Gas ’04 - 08 F-150 V6 & V8) Programmer- AutoMind Programmer (Ford) User Manual
Page 3
96518 v.6.0
3
Follow the vehicle preparation steps
to ensure a complete program
installation. These steps must be
performed prior to installing the Banks
OttoMind program.
WarnInG
• Failure to follow proper
instructions can result in a
damaged or disabled ECM (Engine
Control Module).
• Do not perform any operations
on Banks OttoMind while vehicle
is running. The vehicle must be
parked and engine OFF.
Familiarize yourself with Banks
OttoMind keypad controls. The
keypad will allow the user to navigate
between screens and to select
functions. (See Figure 1).
Section 1
pREpARIng VEhICLE FOR BAnkS OttOMInD pROgRAMMIng
Figure 1: Display and Keypad Description
ESC (ESCAPE):
Scroll menu back to
previous page
Arrow LEFT:
Scroll menu to the
left
ARROW DOWN:
Scroll down the
menu
ARROW UP:
Scroll up the menu
ENT (ENTER):
Select parameter
highlighted in menu
Arrow RIGHT:
Scroll menu right
(use this key to view
entire descriptions)