Banks Power Chevy_GMC Trucks: Duramax LLY (Diesel ’04 - 05 6.6L) Intake- Banks Boost Tube Upgrade '04-09 - Manual (Page 2)

Section 1
ReMovaL of SToCk BooST TUBe & INSTaLLaTIoN of BaNkS
BooST TUBe
1.
Remove the driver side boost
tube. Retain a factory clamp that
connects the boost tube to the
turbo outlet, the factory clamps and
hose from the boost tube to the
charge Air cooler(cAc) for re-use
with Banks Boost Tube.
2.
Install Banks Boost Tube. Re-use
the factory clamp to attach the
turbo outlet to the supplied boost
hose. Use the supplied hose clamp
to attach the boost tube to the
boost hose. Re-use the factory hose
and clamps for the connection of
the Banks Boost Tube to the charge
Air cooler(cAc).
Note: Before slipping any boost
tubes and the corresponding
hoses, into position, ensure that all
connection ends are clean and free
of any oil residue and contaminates.
Clean all connection points with
a non-oil based solvent such as
Acetone, Mineral Spirits, Denatured
Alcohol or Lacquer Thinner. Read
and follow the manufactures
operation instructions for non-oil
based solvent cleaner.
Make sure no debris or foreign
objects have entered the openings
while installing the Banks Boost
Tube. Be sure to remove any items
that were used to prevent debris
and foreign objects from entering
exposed openings.
Gale Banks Engineering
546 Duggan Avenue • Azusa, cA 91702
(626) 969-9600 • Fax (626) 334-1743
Product Information & Sales: (888) 635-4565
bankspower.com