Yamaha DS60-112 - Manual (Page 4)

4
Thank you for purchasing a Yamaha DS60-112 Powered Speaker.
The DS60-112 Powered Speaker is equipped with a built-in 60-watt amplifier and a
single 30cm Celestion speaker. Connecting a DG-Stomp, DG-1000 or other pre-am-
plifier to the DS60-112 creates a 60-watt guitar amplifier system. Adding a DS60-
112 to a DG60FX-112 creates a stereo guitar amplifier system. Also, the SLAVE OUT
jack allows the connection of a second (or multiple) DS60-112 making it possible to
create a 120W or 180W system. The DS60-112 can also be used to upgrade existing
guitar amplifier systems.
To get the best results and longest life out of your DS60-112, we recommend that you
carefully read this manual, and keep it in a safe place for future reference.
Specifications
Output Power 60 Wrms
Speaker 30 cm x 1 (Celestion SEVENTY 80)
Controller/Switch VOLUME, TREBLE, MIDDLE, BASS, EQ ON/OFF, POWER
Connection Jacks INPUT : Standard Phone Mono Jack
SLAVE OUT : Standard Phone Mono Jack
Input Level/Impedance INPUT : 0 dBm / 100 k Ω
Output Level/Impedance SLAVE OUT : 0 dBm / 1 k Ω
Power Requirements U.S. and Canadian models : 120 V, 60 Hz
General model : 230 V, 50 Hz
Power Consumption 70 W
Dimensions (W x H x D) 513 x 491 x 291 mm (20.2” x 19.3” x 101.5”)
Weight 16.0 kg (35 lbs 4 oz)
* Specifications and external appearance are subject to change without notice.