RAM Mount RAM-VB-137ST1-SW1 - Manual

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
SPECIFICATIONS
Placement
Passenger side on the floor, under front seat
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Dimensions
A = 18.125", B = 9.375", C = 5.375”
Hole Centers = 17”
Pole or Pedestal
Sold Separately
Weight
9.6 lbs.
Features
Shown with optional riser
RAM-VB-137ST1
Misc.
Installs in minutes with no drilling required
Low profile keeps mount away from passenger leg space
Rock solid construction
Lifetime warranty
*
Note that this base is best used for bucket seats.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-137ST1
TOYOTA TUNDRA (2000-2006)