Baron Air & Fuel_xXx BIG AIR KIT V-Star 950_1300 & Stryker BLACK - Manual (Page 2)

Page: 2 LA-2313-00/00B
xXx BIG AIR KIT - Yamaha V-Star 950 & 1300 Models
10. Thread the barbed plastic nipple into the large threaded hole on the rear of the backing plate.
11. Be sure each of the (3) aluminum standoffs has Blue Loctite® in the threaded ends.
12. Place the performance air filter up to and over the recessed groove on the backing plate.
13. Set the machined side of the black air filter retaining plate against the front of the filter. Notice there is a
small indention drilled into the front of this plate. This is to assist in aligning the (3) holes in the face with the
standoffs. Rotate the drilled indention to approximately 7:30 (clocked position) to align the standoffs properly
with the holes.
14. Be sure the filter is seated in the grooves of the plates evenly. Thread the remaining (3) 1/4-20 x 3/4"
flathead screws into the standoffs and tighten them firmly.
15. Reach behind the assembly and insert the crankcase vent hose onto the barbed plastic nipple.
16. Put Blue Loctite® in the threaded hole in the center of the black filter plate.
17. Place the chrome mesh cover inside the recess of xXx cover and insert the (1) 1/4-20 x 1/2" flathead bolt
through the hole in the center.
18. Lay this assembly across the front of the filter plate and thread the flathead bolt into the center. Before you
tighten this fully you should align the xXx cover design so it sits with the rotation of the X" properly oriented.
Now tighten the bolt firmly.
AIR/FUEL MIXTURE: Using a stock exhaust system with the xXx Big Air Kit our testing proved there was no
need for an EFI modifier from Dynojet, Kuryakyn, Cobra, TFI or similar. We recommend you have your
bike's air/fuel mixture ratio checked at a qualified tuning center to determine whether you need an EFI
modifier.
Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or
fitment may be required. LA Choppers bears no responsibility on installation costs associated with this product.
© 2013 LA Choppers
5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.lachoppers.com [email protected]