Mannol molibden benzin – SCT-Germany MOLIBDEN BENZIN SAE 10W-40 API SL_CF User Manual

Page 2

background image

7. Handling and storage

· Handling:
· Information for safe handling: No special measures required.
· Information about fire - and explosion protection: No special measures required.
· Storage:
· Requirements to be met by storerooms and receptacles:
No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: None.

8. Exposure controls/personal protection

· Additional information about design of technical facilities: No further data; see item 7.
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have
to be monitored at the workplace.
· Additional information:
The lists valid during the making were used as basis.
· Personal protective equipment:
· General protective and hygienic measures: The usual precautionary measures are to be
adhered to when handling chemicals.
· Respiratory protection: Not required.
· Protection of hands: The glove material has to be impermeable and resistant to the product/the
substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the
preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and
the degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further
marks of quality and varies from manufacturer to manufacturer. As the product is a preparation
of several substances, the resistance of the glove material can not be calculated in advance
and has therefore to be checked prior to the application.
· Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves
and has to be observed.
· Eye protection: Goggles recommended during refilling

Page 2/4


Prepared according to Annex II of EC Regulation 1907/2006

9. Physical and chemical properties

· General Information
· Form: Fluid
· Colour: According to product specification
· Odour: Characteristic
· Value/Range Unit Method
· Change in condition
· Melting point/Melting range: Undetermined.
· Boiling point/Boiling range: Undetermined.
· Flash point: > 100 °C
· Ignition temperature: 200.0 °C

Printing Date: 27.05.2010

Revision Date: 09.05.2010