Electronics 260-P - Manual

* 260P SHOT FLOW METER * * 260P SHOT FLOW METER *
ELECTRONICS INCORPORATED ELECTRONICS INCORPORATED
SHOT PEENING TECHNOLOGY 260DATA.CDR 6/24/02
Model 260 Shot Flow Meter is used in steel shot peening to display
the shot flow rate. This allows adjustment of flow for maximum
coverage in a minimum of time, conserving energy and increasing
productivity. The high/low independently adjustable alarm points
can be used to signal unusual flow conditions and is especially
useful in indicating clogged feed valves or low shot supply.
* Dual high/low alarms
* Analog Meter
* Digital display
* 0-10 VDC recorder output
* Display shot flow
lbs/min or Kg/min
www.shotpeener.com