Moog Music Minimoog Voyager Performer Edition - Manual (Page 45)

Page 46
Voyager User’s Manual - PANEL Mode
Page 47
Voyager User’s Manual - PANEL Mode
LCD CONTRAST
The LCD CONTRAST function changes the viewable angle of the LCD
display. To change this setting, use the -1/+1 buttons to adjust the contrast
level. The change will immediately take effect (you’ll see the display
contrast change) and the new contrast value will be stored automatically.
1. The RME’s front panel controls send MIDI data whether Local
Control is ON or OFF.
2. For Voyager keyboard editions, the LOCAL CONTROL function
is located in the Master Mode menu, function 1.2.
LOCAL CONTROLS (RME only):
The LOCAL CONTROL menu provides Local ON/OFF control of three
groups of RME functions: Panel Knobs (Potentiometers), Panel Switches
(Switches), and Touch Surface. A fourth selection (All Controllers), allows
you to switch the Local Control of all three functions at once. To change
the status of any Local Control function, use the CURSOR to make
a selection and press the +1/-1 buttons to select ON/OFF. When all
changes have been made, press ENTER to enter the changes. To escape at
any time without changes, press PANEL.
When Local Control of any function is switched OFF, the RME will
display a ‘Local Control’ message upon power-up, showing the status of all
controls. To dismiss the message, press any button.
When Local Control of a given function is OFF, and the RME is set to
display parameter values, the LED will display a ‘LOCAL OFF’ message
when you adjust any related control. For example, if Local Control of the
Switches is OFF when you change a Switch position, the RME’s LED will
include a ‘LOCAL OFF’ message on the bottom line of the display. The
status of the switch position change will still be displayed, but the switch
will have no effect.