Cobalt Digital COMPASS 9003 Dual 3G_HD_SD Reclocking Distribution Amplifier - Manual (Page 15)

9003 Owner’s Manual •••• (V 1.6) Page 15
The Menu System
The following table and sections describe the menus, items, and parameters available from the
DashBoard Control System software for the card.
Table 3. DashBoard Menus
Menu Item Parameters Description
Product CDI-9003
Manufacturer Cobalt Digital Inc.
Serial Number
############ Displays the Silicon Serial
Number of the card.
Temperature
Temperature of on card
sensor
Input Current
Current consumed from
+12V rail
Card Info
(Read-only)
Input Voltage
Measured voltage of +12V
rail
Remote Control Enabled/Disabled
This shows whether the
remote is enabled (S1-1
on the board is up)
Routing
In 1ÆOut A, In 2ÆOut B
In 1Æ Out A & B
In 2 Æ Out A & B
Fail-Safe
Routes outputs A & B
from either their
respective inputs, or both
from one of the two
inputs.
Rate A
Automatic
2.967/2970 Gbps
1.5835/1.585Gbps
270 Mbps
This forces the reclocker
to only run at the
specified rate.
“Automatic” means the
reclocker will detect the
input rate and reclock it.
Lock Status A
Describes the current
input rate
Rate B
Automatic
2.967/2970 Gbps
1.5835/1.585Gbps
270 Mbps
This forces the reclocker
to only run at the
specified rate.
“Automatic” means the
reclocker will detect the
input rate and reclock it.
Control
Lock Status B
Describes the current
input rate