Cobalt Digital COMPASS 9229-QS Quad-Split Video Processor - Manual (Page 43)

9229-QS User Manual •••• (V 1.2) Appendix A. DashBoard Menus •••• 5-1
Appendix A. DashBoard Menus
In This Appendix
The DashBoard Control System enables you to monitor and control openGear frames and cards from a
computer. DashBoard communicates with other cards in the 20-slot frames through a MFC-8300 Series
Network Controller Card. This controller card is required in order to use DashBoard to monitor the
9229-QS. Refer to the MFC-8300 Series User Manual for details.
This appendix briefly summarizes the menus, items, and parameters available from the DashBoard
Control System™ for the 9229-QS. Default values are noted with an asterisk (*).
The following topics are discussed:
• Status Tabs
• Configuration Menus
• Proc Amps Menus
• Quad Split Menus
Note — Before proceeding, ensure that you are running DashBoard software version
2.3.0 or higher. The DashBoard Control System software and user manual are available
to download from the Ross Video website (www.opengear.tv).