Cobalt Digital COMPASS 9305 Embedded Audio Delay Processor - Manual (Page 24)

2
Installing a Rear I/O Module
2-4 9305 PRODUCT MANUAL 9305-OM (V4.1)
9305 Rear I/O Modules
Table 2-1 shows and describes the full assortment of Rear I/O Modules
specifically for use with the 9305.
Notes: • Rear I/O Modules equipped with 3-wire Phoenix connectors are supplied
with removable screw terminal block adapters. For clarity, the adapters are
omitted in the drawings below.
Table 2-1 9305 Rear I/O Modules
9305 Rear I/O Module Description
RM20-9305-A Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Four reclocked SDI input copies (RCK OUT 1- 4)
• Four buffered SDI coaxial outputs (SDI OUT 1- 4)
RM20-9305-A/S Split Rear Module. Provides each of the following
connections for two 9305 cards:
• HD/SD-SDI coaxial input ( SDI IN )
• HD/SD-SDI reclocked input copies ( RCK OUT 1 and
RCK OUT 2 )
• Buffered SDI coaxial outputs ( SDI OUT 1 and
SDI OUT 2 )
Note: RM20-9305-A/S Rear I/O Module compatible
only with 20-slot frames.