Cobalt Digital COMPASS 9216-OE-DM AES_EBU Fiber Audio De-Embedder - Manual (Page 41)

9216-OE-DM User Manual •••• (V 1.1) Menus •••• 4-13
Menu
Select
Card-Edge Menu Label Menu Name
Card-Edge Item
Label
Item Name
Frq Swp Frequency Sweep
100% 100% Full Field Bars
Grp 1 Group 1
Grp 2 Group 2
Grp 3 Group 3
5 Grp Sel Group Select
Grp 4 Group 4
Enabled*
6 Grp Enbl Group Enable
Disabled
Mute
T4k 4kHz Tone
T2k 2kHz Tone
T1k 1kHz Tone
T.5k 500Hz Tone
7 Ch1 Src Channel 1 Source
G1C1 - G4C4
Group 1, Channel 1 to Group 4,
Channel 4
8 Ch2 Src Channel 2 Source Same as above
9 Ch3 Src Channel 3 Source Same as above
A Ch4 Src Channel 4 Source Same as above
B AES Sel AES Output Select AES1*- AES8 AES 1 to AES 8
C ChA Src Channel A Source G1C1 - G4C4
Group 1, Channel 1 to Group 4,
Channel 4
D ChB Src Channel B Source Same as above
Menu Descriptions
This section briefly summarizes the menu parameters available in the card-edge display of the 9216-
OE-DM.
0 — Home
This read-only menu displays the product name and the slot the card is installed in the frame.
1 — Factory Defaults
This function enables you to return all controls to their factory default values.
Use the following procedure to reset the card parameters to factory default values using the card-edge
controls:
1. Rotate SW1 to 1 . The Four Character Display displays “Fact Def”.
2. Toggle SW2 down and hold for 3 seconds.