Cobalt Digital COMPASS 9004 Dual 3G_HD_SD Distribution Amplifier (Non-Reclocking) - Manual (Page 15)

9004 Owner’s Manual •••• (V 1.6) Page 15
The Menu System
The following table and sections describe the menus, items, and parameters available from the
DashBoard Control System software for the card.
Table 3. DashBoard Menus
Menu Item Parameters Description
Product CDI-9004
Manufacturer Cobalt Digital Inc.
Serial Number
############ Displays the Silicon Serial
Number of the card.
Temperature
Temperature of on card
sensor
Input Current
Current consumed from
+12V rail
Card Info
(Read-only)
Input Voltage
Measured voltage of +12V
rail
Remote Control Enabled/Disabled
This shows whether the
remote is enabled (S1-1
on the board is up)
Routing
In 1ÆOut A, In 2ÆOut B
In 1Æ Out A & B
In 2 Æ Out A & B
Fail-Safe
Routes outputs A & B
from either their
respective inputs, or both
from one of the two
inputs.
Lock Status A
Describes the current
input rate
Control
Lock Status B
Describes the current
input rate