Cobalt Digital COMPASS 9822 Downconverter - Manual (Page 42)

3
9822 Function Submenu List and Descriptions
3-10 9822 PRODUCT MANUAL 9822-OM (V4.1)
Table 3-2 9822 Function Submenu List
Audio Input Status
Displays signal status for the 16 embedded audio
channels. Also provides global unity routing/parameter
control resets.
• Status Displays Individual signal status displays for embedded audio channels 1-16 as
follows:
• Not Present: Indicates embedded channel does not contain
recognized audio PCM data.
Note: Channel displaying Not Present may still carry usable audio
data with Unlocked being displayed due to invalid headers.
• Present, Professional: Indicates embedded channel contains
recognized pro audio PCM data.
• Present, Consumer: Indicates embedded channel contains audio
PCM data other than pro 48 kHz (for example, S/PDIF).
• Present, Dolby E: Indicates embedded channel contains audio
encoded with Dolby ® E data.
• Present, Dolby Digital: Indicates embedded channel contains
audio encoded with Dolby ® Digital data.
Note: Dolby status displays shown to the left only occur for valid
Dolby ® signals meeting SMPTE 337M standard.
The 9822 card does not perform Dolby ® processing on the
signal. Although the 9822 controls will appear to be usable
for this signal tag, the signal is passed with 1-to-1 routing
and all related gain and polarity controls set to unity.
• Embedded Unity Channel Selection Selects unity reset of Embedded Audio Group 1/2 and 3/4 controls and
re-establishes default 1-to-1 routing.
Applies embedded unity channel selection (as set in the above control).
To apply the selection, click the Confirm button. When Confirm is clicked,
a Confirm? pop-up appears, requesting confirmation.
• Click Yes to proceed with the unity reset.
• Click No to reject unity reset.
Following confirm, the destination channel controls are default reset as
follows:
• Gain is to unity
• Phase control is set to Normal
• Channel is set to Unmuted
•
•
•