Cobalt Digital COMPASS 9223-SA Dual-Channel 3G_HD_SD MPEG-4 Encoder Unit - Manual (Page 14)

14
9223SA-OM (V2.0)
Rear Panel Controls, Indicators, and Connectors
The 9223-SA rear panel is depicted below. It includes two software-configurable
Composite/SDI video inputs on standard BNC connectors, two ASI output ports on standard
BNC connectors, four unbalanced analog audio inputs on standard RCA connectors, and two
100/1000 Mb/s Ethernet ports on standard RJ-45 connectors.
The VID IN 1 / VID IN 2 , ASI OUT 1 / ASI OUT 2 , and ENET 1 / ENET 2 ports are equipped
with LEDs that mirror the front-panel status respectively described in Front Panel Indicators for
these ports.
Note: Unless specified otherwise, “Ethernet” settings, connections, and controls in the remainder
of this manual refer to the transport (video stream) Ethernet interfaces carried over the
ENET 1
and/or ENET 2 transport ports. The Control/Monitor ports are typically used only for unit
network remote control (such as DashBoard).