Cobalt Digital COMPASS 9241 Analog Audio Distribution Amplifier - Manual (Page 11)

11
User Controls
This chapter contains a description of the 9241 user controls:
• LEVEL CONTROLS
• LEDs
• DIP Switch Settings
•
Remote Control
.
Figure 4. Card-edge User Controls
Level CH1 and CH2
The level controls are used to adjust the output levels of the 9241. When using the 9241 as a mono
DA CH1 level control is used. When using the card as a stereo DA both CH1 and CH2 controls are
used. These ten turn potentiometers give precise control of the output signal over a 30 dB range.