Cobalt Digital COMPASS 9220 Bidirectional ASI_MPTS Gateway - Manual (Page 23)

23 9220-UM V1.1
•
Disabled: The port is disabled. There will be no entry in the Active ASI Ports table
for it.
•
TX Overflow: The port is in transmit mode, manual bit rate setting, and the connected
bit rate is excessive. The Dashboard™ Card State will be red and the Status LED in the
front of the board will also be red. To correct this problem, either externally reduce the
input bit rate, or increase the ASI output bit rate, or configure the port in Automatic
mode.
If this alarm is active, data is being dropped .
•
TX Unlocked: The port is in transmit mode, automatic bit rate, and there is no data
rate coming to it. Any downstream ASI receivers will loose lock. Dashboard™ Card
State and the Status LED will be red if there is a connection to this port.
•
RX Unlocked: The port is in receive mode, and it is not locked to any signal.
Dashboard™ Card State and the Status LED will be red if there is a connection to this
port.