Cobalt Digital COMPASS 9345 Stereo Analog Audio to AES A_D Converter - Manual (Page 15)

15
DIP switch settings
1 2 4 3 5 6 7 8
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
Ref Sel (MSB)
S R Sel (MSB)
Reserved
Default (dip switch/memory)
Dashboard enable
ON
OFF
Ref Sel (LSB)
S R Sel
S R Sel (LSB)
Figure 4. DIP Switch
Table 1 Reference Select
Ref Sel Ref Sel
(MSB) (LSB)
1 OFF OFF Frame Ref 1
2 OFF ON Frame Ref 2
3 ON OFF External Ref (rear module)
4 ON ON Internal Ref
Table 2 Internal Sample Rate (SR) Ref set
SR Sel SR Sel SR Sel
(MSB) (LSB)
1 OFF OFF OFF 32 kHz
2 OFF OFF ON 44.1 kHz
3 OFF ON OFF 48 kHz
4 OFF ON ON 96 kHz
5 ON X X 192 kHz
Default (power up default parameter settings)
‘ON’ – Get card parameters from non volatile memory, ignore dip switch
settings. (Configurable with Dashboard Control system)
‘OFF’ – Get card parameters from the Dip switch.
Dashboard Enable
‘ON’ – Only card status is available on Dashboard, users are prevented from
changing parameters.
‘OFF’ – Normal operation, users have full access to the cards parameters.