Cobalt Digital COMPASS 9081 HD_SD Frame Sync - Manual (Page 40)

3
9081 Function Submenu List and Descriptions
3-10 9081 PRODUCT MANUAL 9081-OM (V4.6)
Table 3-2 9081 Function Submenu List
Audio Input Controls
Displays signal status for the 16 embedded audio
channels. Also provides global unity routing/parameter
control resets.
• Status Displays Individual signal status displays for embedded audio channels 1-16 as
follows:
• Not Present: Indicates embedded channel does not contain
recognized audio PCM data.
Note: Channel displaying Not Present may still carry usable audio
data with Unlocked being displayed due to invalid headers.
• Present, Professional: Indicates embedded channel contains
recognized audio PCM data.
• Present, Dolby E: Indicates embedded channel contains Dolby ® E
encoded data.
• Present, Dolby Digital: Indicates embedded channel contains
Dolby ® Digital encoded data.
Note: Dolby status displays shown to the left only occur for valid
Dolby
®
signals meeting SMPTE 337M standard.
(9081 only) The 9081 card does not perform Dolby
®
processing on the signal. Although the 9081 controls will
appear to be usable for this signal tag, the signal is passed
through with all gain and polarity controls set to unity.
(+DEC only) When Dolby ® E or Dolby ® Digital™ is present
on an embedded audio pair, the decoder can provide up to
10 decoded channels (according to the Dolby
® sub-format
and received metadata). All decoded channels are available
as inputs to the audio router.
• Embedded Unity Channel Selection Selects unity reset of Embedded Audio Group 1/2 and 3/4 controls and
re-establishes default 1-to-1 routing by routing Embedded Ch 1 thru
Ch 16 as respective sources to destination channels Embedded Ch 1 thru
Embedded Ch 16.
Applies embedded unity channel selection. To apply the unity reset, click
the Confirm button. When Confirm is clicked, a Confirm? pop-up
appears, requesting confirmation.
• Click Yes to proceed with the unity reset.
• Click No to reject unity reset.
When confirmed, the destination channel controls are default reset as
follows:
• Gain is to unity
• Phase control is set to Normal
• Channel is set to Unmuted
•
•
•