Rf-tvml70 tv wall mount – RocketFish RF-TVML70 - User Manual User Manual
Page 6
6
Need help? Call 800-620-2790
RF-TVML70 TV Wall Mount
STEP 2 - Determine whether your TV has a flat back or an irregular or obstructed
back
1
Temporarily lay the vertical rails (B) on the back of your TV.
2
Align the screw holes in the vertical rails or VESA adapters with the mounting screw holes on your TV.
3
Identify which type of back your TV may have:
• Flat back: The vertical rails lay flush against the back of your TV and do not block any jacks. You do
not need spacers when assembling the wall mount.
• Obstructed back: A vertical rail blocks any of the jacks on the back of your TV. You will need spacers
when assembling the wall mount.
• Irregularly-shaped back: There is a gap between a vertical rail and some part of the back of your TV.
You will need spacers when assembling the wall mount.
4
Remove the vertical rails.
RF-TVML70_13-0455_MAN_V3_ENG.fm Page 6 Monday, May 6, 2013 7:45 AM