TC Electronic PolyTune 2 - Manual (Page 6)

Setup
PolyTune 2 English Manual Version 2.1 4
Setup
Ready…
The PolyTune 2 box should contain the follow-
ing items:
– 1 PolyTune 2 pedal
– 2 rubber feet for “non-velcro” pedalboard
mounting
– 1 TC Electronic sticker
– 1 leaflet about TC’s guitar FX product range.
Inspect all items for signs of transit damage. In
the unlikely event of transit damage, inform the
carrier and supplier.
If damage has occurred, keep all packaging as it
can be used as evidence of excessive handling
force.
Set…
– Connect a 9V power supply with the following
symbol to power in socket of PolyTune 2.
! Please note that PolyTune 2 does not come
with a power supply.
! You can also power PolyTune 2 using a
standard 9V battery, but if you intend to
power additional pedals using the power
out jack, you need to use a power supply.
– Plug the power supply into a power outlet.
– Connect your instrument to the “in” jack on
the right side of the pedal using a ¼“ jack ca-
ble.
– Connect the “out” jack on the left side of the
pedal to your amplifier using a ¼“ jack cable.
– If you have another 9V guitar pedal that you
want to power, connect it to the power out
socket on the rear of the pedal.
Get ready for a new
tuning experience!
Tuning your instrument with PolyTune 2 is fast
and intuitive. If you don’t feel like reading the
manual, just strum your instrument and watch
the display. We think you’ll like what you see.
If you want to learn more – read on!