TC Electronic Blacksmith - Manual (Page 23)

21
EN
Input Section
Input connector
Input impedance
Gain range
Tone controls
Bass
Low Mid
High Mid
Treble
Tweeter Tone
Tube Tone
Spectra Comp
Preset Level
User Memories
Tuner
Tuning range
Mute
Mains supply
Speaker out
1/4” jack
1 MOhm / 100 pF
-96 to 32 dB
Default Freq: 200 Hz (range: 71-1120 Hz,
Gain: +15/-24 dB) - Shelving type.
Default Freq: 400 Hz (range: 100-1600 Hz,
Gain: +15/-24 dB)
Default Freq: 800 Hz (range: 200-3150 Hz,
Gain: +15/-24 dB)
Default Freq: 4000 Hz (range: 400-6300 Hz,
Gain: +15/-24 dB) - Shelving type.
-12 to 12, L-PAD Cabinet Recreation
0 to 12, Tube amp Recreation
3 band Spectral Compression
-12 dB to 0 gain attenuation
3 memory locations storing all front panel controls
except Mute & Master Level
Chromatic, constant on
A0 (27.50 Hz) to E5 (659.26 Hz)
Mutes Speaker out and Balanced out
100-120V~ or 220-240V~ 50/60 Hz
(200 W @ 1/8 Power)
2x Speakon TM
Power rating
2 Ohm / >4 Ohm setting
Balanced output
Max. Output
Optimal Load Impedance
Preamp out
Power amp in
Digital Recording out
Remote connection
Operating/Storage
Temperature
Humidity
Dimensions
Weight
Finish
1600 W (4500 W Peak)
Recessed Toggle Switch
Transformer Balanced XLR, Pre/Post Pre-amp
+0 dBu
600 Ohm
1/4” Jack, Balanced Output, Max Output Level =
+8 dBu
1/4” Jack, balanced input, impedance =
10 kOhm, Max Input Level = +8 dBu
Balanced XLR, AES/EBU, (24 Bit)
5 pin DIN, Cable with shield
0° C to 50° C / -30° C to 70° C
Max. 90 % non-condensing
483 x 412 x 178 mm / 19” x 16.2” x 7”
12 kg / 26.5 pounds
Anodized aluminum front
Plated and painted steel chassis
appendIx – technIcal SpecIfIcatIonS
21
en
Due to continuous development, these specifications
are subject to change without notice.