TC Electronic DVR2 TDM - Manual (Page 13)

DVR2 - TDM / 13
EE
NN
GG
LL
II
SS
HH
LOCKING PARAMETER VALUES – USING THE PARAMETER LOCK
The parameter lock function allows you to lock the parameters In Level, Out Level, Dry
Level, Wet Level and the assignment of the Focus fields from changing when you
change preset.
By using the parameter lock, you can easily browse through the extensive set of pre-
sets that comes with the DVR2, without having to change back the locked parameter
with each preset change.
To lock a parameter, simply click on the small lock in the parameter field. To unlock
it, click again.
COMPARE SETTINGS WITH A/B MEM.
With the A/B compare function you can easily compare different parameter settings
when you work with your music. You have two buttons: the “Mem” and the “A/B” but-
ton.
When you start working with your preset, the A/B button is grayed out. This state indi-
cates that the settings in both memory locations A and B are identical – so there is
actually nothing to compare.As soon as you touch one of the parameters, the memory
location “A” will get active, and the “A”-part of the A/B button will light up. All
parameter changes will be applied to memory location “A”. If you switch to memory
location “B”, you get back to your starting point, and all further changes will now be
applied to memory location “B”. Every time you press the A/B button, you will toggle
between these two memory locations.
Note: The A/B memory locations are temporary settings only! Saving a preset (e.g. via
the File button or with your session) will only save the currently selected memory loca-
tion. The setting of the other (hidden) memory location will not be saved!
The “Mem” button will reset the A/B memory locations to the current setting.