TC Electronic Spark Mini Booster - Manual (Page 14)

Getting support
Spark Mini Booster English Manual Version 2.1 12
Technical Specifications
– Maximum Setting: 20 dB
– Minimum Setting: 0 dB boost (unity gain)
– Bypass mode: True Bypass
– Signal Circuitry: 100 % analog
– Dimensions (Width x Depth x Height):
48 x 48 x 93 mm / 1.9 x 1.9 x 3.7“
– Input Connector Type:
Standard ¼“ jack – mono / TS
– Output Connector Type:
Standard ¼“ jack – mono / TS
– Power Input:
Standard 9 V DC,
centre negative
> 40 mA (not supplied)
Due to continuous development, these speci-
fications are subject to change without no-
tice.
Controls
– Level Knob: Amount of boost
– Switch: Boost On / off / PrimeTime
– PrimeTime:
Holding down the footswitch for more than
one second will activate PrimeTime for boos-
ting essential passages. The boost will disen-
gage when you release the footswitch.
– Input Impedance: 1 MΩ
– Output Impedance: 100 Ω
Getting support
If you still have questions about the product af-
ter reading this manual, please get in touch with
TC Support:
http://tcelectronic.com/support/