TC Electronic Ditto X2 Looper - Manual (Page 25)

Getting support
Ditto X2 Looper English Manual 23
Technical specifications
– Maximum loop length: 5 minutes
– Maximum no. of overdubs: Unlimited
– Bypass mode: True Bypass
– Latency: None (analog dry-through)
– Dimensions (Width x depth x height):
135 mm x 113 mm x 54 mm /
5.31” x 4.44” x 2.13
– Weight: 512 g / 1.13 lbs.
– Input connectors:
Stereo – 2 standard TS ¼” jacks
– Output connector type:
Stereo – 2 standard TS ¼” jacks
– Power input: Standard 9 V DC,
centre negative (not supplied)
– USB connector type: Mini-B USB
Controls:
– Loop level knob
– Loop footswitch
– FX footswitch
– FX selector switch
– Store / Backing track level switch
Due to continuous development, these speci-
fications are subject to change without no-
tice.
Getting support
If you still have questions about the product af-
ter reading this manual, please get in touch with
TC Support:
http://tcelectronic.com/support/