TC Electronic Hall of Fame Reverb - Manual (Page 12)

12
Bypass modes and Kill Dry on/off
Unscrew the back-plate and look for the two small dip-switches in the upper left corner.
The upper dip-switch (closest to the DC 9V in connection), switches between True Bypass mode
(default) and Buffered Bypass mode.
True Bypass – is a hard-wire bypass that gives absolutely no coloration of tone when the pedal
is bypassed. Using True Bypass on all pedals is a perfect choice in setups with a few pedals and
relatively short cables before and after the pedals.
True Bypass Buffered Bypass Kill-Dry - off Kill-Dry - on