5 other functions, 7 bluetooth coexistence, 8 wakeup – Rainbow Electronics DAB-WLS-C01 (WiFi) User Manual
Page 9
DSH_WISMC01_1v2 WISM 40 pin TCP-IP Data Sheet.doc © 2007 EZURiO Ltd
Page 9
5.2.2.5
Other Functions
Signal Name
Pin No
I/O
Comments
RESET
13
I
Active high. The RESET line has a fixed 10kOhm pull down
resistor to ground, followed by a 10kOhm resistor feeding
the base of a transistor.
3VOUT
27
O
Used to monitor the state of the regulated supply within the
module. THIS PIN MUST NOT BE USED TO POWER AN
EXTERNAL CIRCUIT.
5.2.2.6
Signal Levels for Bluetooth Coexistence and Wakeup Pins
Signal Type
Signal level
Input V
IL
max=1.0V
V
IH
min=1.5V
V
IH
max=3.5V
Output V
OL
max=0.4V
V
OH
min=2.4V
5.2.2.7
Bluetooth Coexistence
Signal Name
Pin No
I/O
Comments
WLAN_ACTIVE 5 O
BT_PRIORITY
24
I
If unused, this pin should be pulled low.
BT_STATE
40
I
If unused, this pin should be pulled low.
5.2.2.8
Wakeup
Signal Name
Pin No
I/O
Comments
WAKEUP
22
I
Reserved for future use. The WAKEUP line has a fixed
100kOhm pull-up resistor.