Section 2, Setting up the sbc35-a9260 board, Electrostatic warning – Rainbow Electronics SBC35-A9260-C12 User Manual
Page 5: Requirements, Layout
Advertising
S
ECTION
2
1. Setting Up the SBC35-A9260 Board
1.1. Electrostatic Warning
The SBC35-A9260 board is shipped in protective anti-static packaging. The board must not
be subjected to high electrostatic potentials. A grounding strap or similar protective device
should be worn when handling the board. Avoid touching the component pins or any other
metallic element.
1.2. Requirements
In order to set up the SBC35-A9260 board, the following items are needed:
●
the SBC35-A9260 board itself.
●
AC/DC power adapter (5V at 2A), 2.1 mm by 5.5 mm
1.3. Layout
Datasheet USG-00001-B01
5/28
Advertising