Uhf ask/fsk transmitter block, Features, Description – Rainbow Electronics T48C862-R8 User Manual
Page 4: Uhf ask/fsk transmitter block features
4
T48C862-R8
4590B–4BMCU–02/03
UHF ASK/FSK Transmitter Block
Features
•
Integrated PLL Loop Filter
•
ESD Protection also at ANT1/ANT2
(4 kV HBM/200 V MM, Except Pin 2: 4 kV HBM/100 V MM)
•
High Output Power (5.5 dBm) with Low Supply Current (8.5 mA)
•
Modulation Scheme ASK/FSK
– FSK Modulation is Achieved by Connecting an Additional Capacitor between the XTAL Load Capacitor and the Open-
drain Output of the Modulating Microcontroller
•
Easy to Design-in Due to Excellent Isolation of the PLL from the PA and Power Supply
•
Single Li-cell for Power Supply
•
Supply Voltage 2.0 V to 4.0 V in the Temperature Range of -40
°C to 85°C/125°C
•
Package TSSOP8L
•
Single-ended Antenna Output with High Efficient Power Amplifier
•
CLK Output for Clocking the Microcontroller
•
One-chip Solution with Minimum External Circuitry
•
125
°C Operation for Tire Pressure Systems
Description
The PLL transmitter block has been developed for the demands of RF low-cost transmission systems, at data rates up to
32 kbaud. The transmitting frequency range is 868 MHz to 928 MHz. It can be used in both FSK and ASK systems.