Rainbow Electronics W78C801 User Manual

Rainbow Electronics Sensors

Advertising
background image

W78C801

8-BIT MICROCONTROLLER

Publication Release Date: February 1999

- 1 -

Revision A3

GENERAL DESCRIPTION

The W78C801 is an 8-bit microcontroller which can accommodate a wide frequency range with low
power consumption. The instruction set for the W78C801 is fully compatible with the standard 8051.
The W78C801 contains an 4K bytes Mask ROM; a 256 bytes RAM; four 8-bit bi-directional and bit-
addressable I/O ports; an additional 6-bit I/O port P4; two 16-bit timer/counters; a hardware watchdog
timer. These peripherals are supported by a twelve sources two-level interrupt capability. The
W78C801 does not contain serial port.

The W78C801 microcontroller has two power reduction modes, idle mode and power-down mode,
both of which are software selectable. The idle mode turns off the processor clock but allows for
continued peripheral operation. The power-down mode stops the crystal oscillator for minimum power
consumption. The external clock can be stopped at any time and in any state without affecting the
processor.

FEATURES

•

Fully static design 8-bit CMOS microcontroller

•

DC-40 MHz operation

•

256 bytes of on-chip scratchpad RAM

•

4 KB Mask-ROM

•

64 KB program memory address space

•

64 KB data memory address space

•

Four 8-bit bi-directional ports

•

Two 16-bit timer/counters

• Watchdog Timer
• Direct LED drive outputs
•

Twelve sources, two-level interrupt capability

• Wake-up via external interrupts at Port 1
• EMI reduction mode
•

Built-in power management

•

Code protection mechanism

•

Packages:

− DIP 40: W78C801-24/40
− PLCC 44: W78C801P-24/40

− PQFP 44: W78C801F-24/40

Advertising
Table of contents