Nuc130 series data sheet – Rainbow Electronics NUC130 User Manual

Page 8

Advertising
background image

NUC130 Series DATA SHEET

Publication Release Date: May 31, 2010

- 8 -

Revision V1.02

•

I

2

C

–

Two sets of I

2

C device.

–

Master/Slave up to 1Mbit/s

–

Bidirectional data transfer between masters and slaves

–

Multi-master bus (no central master).

–

Arbitration between simultaneously transmitting masters without corruption of serial data on
the bus

–

Serial clock synchronization allows devices with different bit rates to communicate vian one
serial bus.

–

Serial clock synchronization can be used as a handshake mechanism to suspend and resume
serial transfer.

–

Programmable clocks allow versatile rate control.

–

I2C-bus controllers support multiple address recognition ( two slave address with mask option)

•

I

2

S

–

Interface with external audio CODEC

–

Operate as either master or slave mode

–

Capable of handling 8, 16, 24, and 32 bit word sizes

–

Mono and stereo audio data supported

–

I

2

S and MSB justified data format supported

–

Two 8 word FIFO data buffers are provided, one for transmit and one for receive

–

Generates interrupt requests when buffer levels cross a programmable boundary

–

Support two DMA requests, one for transmit and one for receive

• CAN

2.0

–

CAN 2.0B protocol compatible device

–

Support 11-bit identifier as well as 29-bit identifier

–

Bit rates up to 1Mbits/s

–

NRZ bit Coding/ Encoding

–

Error Detection & Status Report

‹

Bit error, Form error, Stuffing error, 15-bit CRC detection, and Acknowledge error
Interrupt

‹

Each CAN-bus error and Transmission/Receive Done.

–

Bit Timing Synchronization

–

Acceptance filter extension

–

Sleep mode wake up

• ADC

–

12-bit SAR ADC with 800ksps

–

Up to 8-ch single-end mode or 4-ch differential mode

–

Single scan/single cycle scan/continuous scan

–

Each channel with individual result register

–

Scan on enabled channels

–

Threshold voltage detection

–

Conversion start by S/W, external pins

–

Support PDMA Mode

• Analog

Comparator

–

Two analog comparator modules

–

External input or internal bandgap voltage selectable at negative node

–

Interrupt when compare result change

–

Power down wake up

Advertising