Rainbow Electronics MAX9013 - Manual

General Description
The MAX9010/MAX9011/MAX9013 single and MAX9012
dual, high-speed comparators operate from a single
4.5V to 5.5V power supply and feature low-current con-
sumption. They have precision differential inputs and
TTL outputs. They feature short propagation delay (5ns,
typ), low-supply current, and a wide common-mode
input range that includes ground. They are ideal for low-
power, high-speed, single-supply applications.
The comparator outputs remain stable through the linear
region when driven with slow-moving or low input-over-
drive signals, eliminating the output instability common
to other high-speed comparators. The input voltage
range extends to 200mV below ground with no output
phase reversal. The MAX9013 features complementary
outputs and both the MAX9011/MAX9013 have a latch
enable input (LE). The MAX9013 is an improved plug-in
replacement for the industry-standard MAX913 and
LT1016/LT1116, offering lower power and higher speed
when used in a single 5V supply application.
For space-critical designs, the single MAX9010 is avail-
able in the tiny 6-pin SC70 package. The single
MAX9011 is available in a space-saving 6-pin SOT23
package. The dual MAX9012 and the single MAX9013
are available in 8-pin µMAX and 8-pin SO packages. All
products in the family are guaranteed over the extended
temperature range of -40°C to +85°C.
Applications
High-Speed Signal Squaring
Zero-Crossing Detectors
High-Speed Line Receivers
High-Speed Sampling Circuits
High-Speed Triggers
Fast Pulse-Width/Height Discriminators
____________________________Features
♦ Ultra-Fast, 5ns Propagation Delay
♦ Low Quiescent Current:
900µA (MAX9010/MAX9011)
1.3mA (MAX9013)
2.4mA (MAX9012)
♦ Single-Supply 4.5V to 5.5V Applications
♦ Input Range Extends Below Ground
♦ No Minimum Input Signal Slew-Rate Requirement
♦ No Supply-Current Spikes During Switching
♦ Stable when Driven with Slow-Moving Inputs
♦ No Output Phase Reversal for Overdriven Inputs
♦ TTL-Compatible Outputs (Complementary for
MAX9013)
♦ Latch Function Included (MAX9011/MAX9013)
♦ High-Precision Comparators
0.7mV Input Offset Voltage
3.0V/mV Voltage Gain
♦ Available in Tiny 6-Pin SC70 and SOT23 Packages
MAX9010–MAX9013
SC70, 5ns, Low-Power, Single-Supply,
Precision TTL Comparators
________________________________________________________________ Maxim Integrated Products 1
TOP VIEW
GND
IN- IN+
1 6 V CC
5 V CC
OUT
SC70
2
3 4
GND
IN- IN+
1 6 V CC
5 LE
OUT
SOT23
2
3 4
MAX9011
+ –
MAX9010
+ –
OUTB
GND INB-
1
2
8
7
V
CC
OUTA INA-
INB+
INA+
SO/ µMAX
3
4
6
5
GND
LE N.C.
1
2
8
7 OUT IN+
IN-
V
CC
SO/ µMAX
3
4
6
5
MAX9012
+
_
MAX9013
+
_
+
_
OUT
Pin Configurations
19-1932; Rev 1; 1/02
Ordering Information
PART TEMP RANGE
PIN-
PACKAGE TOP
MARK
MAX9010EXT-T -40°C to +85°C 6 SC70-6 AAA
MAX9011EUT-T -40°C to +85°C 6 SOT23-6 AADD
MAX9012EUA -40°C to +85°C 8 µMAX —
MAX9012ESA -40°C to +85°C 8 SO —
MAX9013EUA -40°C to +85°C 8 µMAX —
MAX9013ESA -40°C to +85°C 8 SO —
Selector Guide appears at end of data sheet.
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.