Ds2710 single-cell nimh charger, Pin description – Rainbow Electronics DS2710 User Manual

Page 4

Advertising
background image

DS2710

Single-Cell NiMH Charger

4

_______________________________________________________________________________________

Pin Description

PIN

NAME

FUNCTION

1 V

SS

Device Ground. Connects directly to the negative terminal of the charge source.

2

CS

Charge Source. Feedback control for switching circuitry.

3 V

DD

Power-Supply Input. Connects to the positive terminal of the charge source through a decoupling
network.

4

THM

Thermistor Input. Connects to a thermistor located near the cell and a resistor-divider from the V

DD

pin.

5

STATUS

Status Output. Drives an external LED or microprocessor input to indicate charge status.

6

CTEST

Impedance Test. Connects to V

SS

through an external resistor to set the impedance-test threshold.

7

TMR

Fast-Charge Timer. Connects to V

SS

through an external resistor to set the fast-charge timeout period.

8

VN0

Current-Sense Negative Input. Connects to the charge source side of the external sense resistor.

9

VN1

Current-Sense Positive Input. Connects to the cell side of the external sense resistor.

10

VP1

Cell Voltage Sense. The voltage of the cell is monitored through this input pin.

—

EP

Exposed Pad. Connects to V

SS

.

DS2710

BIAS

OSCILLATOR

WATCHDOG

ABORT

VP1

I

PTST

UVLO

3.5V

V

DD

STATUS

CTEST

STATUS

MAINTENANCE CHARGE

TOP-OFF CHARGE

SUSPEND

PRECHARGE

PRESENSE TEST

STATE MACHINE

FAST-CHARGE AND

CELL TESTS

VOLTAGE

AND

TEMPERATURE

MEASUREMENT

DUTY-
FACTOR
CONTROL

VN1

THM

CS

0.125V

0.1

μA

V

SS

VN0

CELL
TEST

TMR

CHARGE

TIMER

Figure 1. Block Diagram

Advertising