Low-current i – Rainbow Electronics DS1342 User Manual
Page 4
Low-Current I
2
C RTCs for High-ESR Crystals
DS1341/DS1342
4
Note 11: CB is the total capacitance of one bus line, including all connected devices, in pF.
Note 12: The parameter tOSF is the period of time the oscillator must be stopped for the OSF flag to be set over the voltage
range of 2.4V P V
CC
P V
CCMAX
.
Note 13: The DS1341/DS1342 can detect any single SCL clock held low longer than t
TIMEOUTMIN
. The devices’ I
2
C interface is
in reset state and can receive a new START condition when SCL is held low for at least t
TIMEOUTMAX
. Once the device
detects this condition, the SDA output is released. The oscillator must be running for this function to work.
Figure 1. Data Transfer on I
2
C Serial Bus
SCL
NOTE: TIMING IS REFERENCED TO V
ILMAX
AND V
IHMIN
.
SDA
STOP
START
REPEATED
START
t
BUF
t
HD:STA
t
HD:DAT
t
SU:DAT
t
SU:STO
t
HD:STA
t
SP
t
SU:STA
t
HIGH
t
R
t
F
t
LOW