Transparencies, Guidelines, Printing transparencies from tray 1 (mpt) – Xerox Phaser 3450 User Manual
Page 24
Transparencies
Phaser™ 3450 Laser Printer
17
Transparencies
Transparencies can be printed from any tray; however, Tray 1 (MPT) is recommended.
Guidelines
Place no more than 50 transparencies at one time in Tray 1 (MPT), Tray 2, or Try 3.
■
Handle transparencies by the edges using both hands to avoid fingerprints and creases
which can cause poor print quality.
■
Use transparencies intended for monochrome laser printers.
Printing Transparencies from Tray 1 (MPT)
1.
Fan the transparencies to release sheets that may stick together.
2.
Insert the transparencies into Tray 1 (MPT). For information about how to load paper in
Tray 1 (MPT), see the Quick Reference Guide that came with your printer. The Quick
Reference Guide can also be found on the Software and Documentation CD-ROM that
came with your printer, or at
3.
At the printer’s front panel:
a.
Press the Menu button, select
Printer Setup
, then press the OK button.
b.
Select
Paper Handling,
then press the OK button.
c.
Select
Tray 1 Size,
then press the OK button.
d.
Select
Letter or A4
, then press the OK button.
e.
Press the Cancel button to return to the main menu.
3450-057
3450-041