Rainbow Electronics ATF1500AL - Manual (Page 6)

ATF1500A(L)
6
Note: 1. All I
CC
parameters measured with outputs open, and a 16-bit loadable, up/down counter programmed into each region.
Absolute Maximum Ratings*
Temperature Under Bias.................................. -40°C to +85°C *NOTICE: Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Note: 1. Minimum voltage is -0.6V DC, which may under-
shoot to -2.0V for pulses of less than 20 ns. Max-
imum output pin voltage is V
CC
+ 0.75V DC,
which may overshoot to 5.25V for pulses of less
than 20 ns.
Storage Temperature ..................................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground .........................................-2.0V to +7.0V
(1)
Voltage on Input Pins
with Respect to Ground
During Programming.....................................-2.0V to +14.0V
(1)
Programming Voltage with
Respect to Ground .......................................-2.0V to +14.0V
(1)
DC and AC Operating Conditions
Commercial Industrial
Operating Temperature (ambient) 0
°
C - 70
°
C -40
°
C - 85
°
C
V
CC
Power Supply 5V ± 5% 5V ± 10%
DC Characteristics
Symbol Parameter Condition Min Typ Max Units
I
IL
Input or I/O
Low Leakage Current
0
≤
V
IN
≤
V
IL
(Max) -10
µ
A
I
IH
Input or I/O
High Leakage Current
V
IH
, Min
≤
V
IN
≤
V
CC
10
µ
A
I
CC1
(1)
Power Supply Current,
Standby V
CC
= Max,
V
IN
= 0, V
CC
ATF1500A
Com. 70 mA
Ind. 100 mA
ATF1500AL
Com. 3 mA
Ind. 5 mA
I
CC2
Power Supply Current,
Pin-Controlled Power
Down Mode
V
CC
= Max,
V
IN
= 0, V
CC
2 10 mA
I
OS
Output Short Circuit
Current
V
OUT
= 0.5V -130 mA
V
IL
Input Low Voltage
V
CC
, Min < V
CC
< V
CC
, Max
-0.5 0.8 V
V
IH
Input High Voltage 2.0 V
CC
+ 1 V
V
OL
Output Low Voltage V
CC
= Min I
OL
= 12 mA 0.45 V
V
OH
Output High Voltage V
CC
= Min
I
OH
= -4 mA 2.4 V
I
OH
= -0.2 mA V
CC
- 0.2 V