Rainbow Electronics DS4560 User Manual

General description, Applications features, Pin configuration ordering information

Advertising
background image

General Description

The DS4560 is a self-contained hot-plug switch intend-
ed to be used on +12V power buses to limit through
current and to control the power-up output-voltage
ramp. The device contains an on-board 25m

Ω n-chan-

nel power MOSFET that is actively closed-loop con-
trolled to ensure that an adjustable current limit is not
exceeded. The maximum allowable current through the
device is determined by an external resistor connected
to the ILIM pin.

The DS4560 also contains the ability to control the
power-up output-voltage ramp. A capacitor connected
to the VRAMP pin sets the desired voltage ramp rate.
The output voltage is unconditionally clamped to keep
input overvoltage stresses from harming the load. The
DS4560 also contains an adjustable power-up timer. A
capacitor connected to the TIMER pin determines how
long after power-on reset the DS4560 should wait
before starting to apply power to the load. The TIMER
pin can also be driven with a digital logic output to cre-
ate a device-enable function.

The DS4560 contains an on-board temperature sensor
with hysteresis. If operating conditions cause the
device to exceed an internal thermal limit, the DS4560
either unconditionally shuts down and latches off await-
ing a power-on reset (DS4560S-LO), or it waits until the
device has cooled by the hysteresis amount and then
restarts (DS4560S-AR).

Applications

Features

On-Board 25mΩ Power MOSFET
Adjustable Short-Circuit Current and Overload

Current Limit

Adjustable Output-Voltage Slew Rate
Adjustable Power-Up Timer with External Enable

Capability

Output Overvoltage Limiting
On-Board Thermal Protection
On-Board Charge Pump
Latchoff and Autoretry Versions Available
9.0V to 13.2V Supply Operation
8-Pin SO (150 mils) Pb-Free Package

DS4560

12V Hot-Plug Switch

________________________________________________________________

Maxim Integrated Products

1

SO (150 mils)

TOP VIEW

2

7

LOAD

VRAMP

1

8

V

CC

GND

LOAD

TIMER

3

6

LOAD

ILIM

4

5

DS4560

+

Pin Configuration

Ordering Information

Rev 1; 9/08

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.

+

Denotes a lead-free/RoHS-compliant package.

T = Tape and reel.

PART

THERMAL

SHUTDOWN

PIN-PACKAGE

DS4560S-LO+ Latchoff 8

SO

DS4560S-LO+T Latchoff 8

SO

DS4560S-AR+ Autoretry 8

SO

DS4560S-AR+T Autoretry 8

SO

Pin Description

PIN

NAME

FUNCTION

1 GND

Ground. This is also a heat sink for the
device.

2

VRAMP Output-Voltage Ramp Adjustment

3 TIMER

Power-Up

Timer/Enable

4 ILIM

Current-Limit

Adjustment

5, 6, 7

LOAD

Output Load Connection (MOSFET Source)

8 V

CC

Input Supply Voltage (MOSFET Drain)

PCI Express is a registered trademark of PCI-SIG Corp.

InfiniBand is a trademark and service mark of the InfiniBand Trade Association.

RAID/Hard Drives

Servers/Routers

PCI/PCI Express

®

InfiniBand

SM

Base Stations

Advertising