Rainbow Electronics DS1305 - Manual (Page 20)

DS1305
20 of 20
NOTES:
1) I
CC1T
and I
CC2T
are specified with CE set to a logic 0 and EOSC bit = 0 (oscillator enabled).
2) I
CC1A
and I
CC2A
are specified with CE = V
CC
, SCLK=2MHz at V
CC
= 5V; SCLK = 500kHz
at V
CC
= 2.0V, V
IL
= 0V, V
IH
= V
CC
, and EOSC bit = 0 (oscillator enabled).
3) Measured at V
IH
= 2.0V or V
IL
= 0.8V and 10ms maximum rise and fall time.
4) Measured with 50pF load.
5) Measured at V
OH
= 2.4V or V
OL
= 0.4V.
6) I
CC1S
and I
CC2S
are specified with CE set to a logic 0. The EOSC bit must be set to logic 1 (oscillator
disabled).
7) V
CC
= V
CC1
, when V
CC1
> V
CC2
+ 0.2V (typical); V
CC
= V
CC2
, when V
CC2
> V
CC1
.
8) V
CC2
= 0V.
9) V
CC1
= 0V.
10) V
CC1
< V
BAT.
11) V
CCIF
must be less than or equal to the largest of V
CC1
, V
CC2
, and V
BAT
.
12) Using a crystal on X1 and X2, rated for 6pF load.