Typical operating characteristics (continued), Pin description – Rainbow Electronics DS2778 User Manual

Page 7

Advertising
background image

DS2775/DS2776/DS2777/DS2778

2-Cell, Stand-Alone, Li+ Fuel-Gauge IC with

Protector and Optional SHA-1 Authentication

_______________________________________________________________________________________

7

CURRENT MEASUREMENT

ACCURACY

DS2775/6/7/8 toc07

V

SNS

(mV)

ACCURACY (

μ

V)

0.048

0.028

0.008

-0.012

-0.032

-75

-25

25

75

125

-125

-0.052

+70

°C

-20

°C

+25

°C

I

RC

vs. V

DD

DS2775/6/7/8 toc08

V

DD

(V)

I

RC

(mA)

5

4

3

2

1

1

2

3

4

5

6

7

0

0

6

1k

Ω RESISTOR FROM PLS TO PK+

CURRENT MEASUREMENT OFFSET

vs. TEMPERATURE

DS2775/6/7/8 toc09

TEMPERATURE (

°C)

LSB (1.5625

μ

V)

60

40

20

0

-4

-3

-2

-1

0

1

2

-5

-20

Typical Operating Characteristics (continued)

(T

A

= +25°C, unless otherwise noted.)

Pin Description

PIN

NAME

FUNCTION

1

CC

Charge Control. Charge FET control output.

2 V

DD

Chip-Supply Input. Bypass with 0.1μF to V

SS

.

3

DC

Discharge Control. Discharge FET control output.

4 V

IN2

Battery Voltage Sense Input 2. Connect to highest voltage potential positive cell terminal through
decoupling network.

5 V

IN1

Battery Voltage Sense Input 1. Connect to lowest voltage potential positive cell terminal through
decoupling network.

6

VB

Regulated Operating Voltage. Bypass with 0.1μF to V

SS

.

7 V

SS

Device Ground. Chip ground and battery-side sense resistor input.

8

SNS

Sense Resistor Connection. Pack-side sense resistor sense input.

9

PIO

Programmable I/O. Can be configured as wake input.

10 PLS

Pack Plus Terminal Sense Input. Used to detect the removal of short-circuit, discharge overcurrent, and
charge overcurrent conditions.

11 SDA/DQ

Data Input/Output. Serial data I/O, includes weak pulldown to detect system disconnect and can be
configured as wake input for 1-Wire devices.

12 SCL/OVD

Serial Clock Input/Overdrive Select. Communication clock for 2-wire devices/overdrive select pin for
1-Wire devices.

13

SRC

Protection MOSFET Source Connection. Used as a reference for the charge pump.

14

CP

Charge Pump Output. Generates gate drive voltage for protection FETs. Bypass with 0.47μF to SRC.

—

EP

Exposed Pad. Connect to ground or no connection.

Advertising